USMC Flack Jacket – Military Body Armor Kevlar Vest (Size XL)


In stock


Here’s your chance to get some of the last new sets of Interceptor Body Armor (IBA) on the market. This extra-large USMC and Army-issue Kevlar flak jacket includes the Outer Tactical Vest (OTV), Yoke and Collar Outershell, Throat Protector, and Groin Protector.

The base fragmentation vest consists of a back panel, front right panel and front left panel. Each panel consists of a removable ballistic insert and an outershell component. The front panels are connected to the back panel with three pieces of nylon webbing at each side (two outside side adjustment straps and an inside side retention strap) and are also attached at the shoulders. After donning the vest, the front panels are secured using hook and loop fastener tape and snap fasteners.

The back panel has a SAPI pocket at the top that can be accessed while the vest is worn. The front right panel has a SAPI pocket that can also be accessed while the vest is worn. The front SAPI pocket has an eject strap that allows the user to quickly eject the hard armor protective insert. The fit of the vest is adjusted using the nylon webbing at each side of the vest.

The bullet-proof vest has PALS webbing located on both the front and back panels.

This style military vest is tested to stop a 9 mm 124 grain full metal jacket bullet at 1,400 ft/s (426 m/s) with minimal deformation and has a V-50 (minimum bullet Velocity for a 50% chance of penetration) of roughly 1,525 ft/s (465 m/s). This means that the bullet has to be traveling faster than 1,525 ft/s for it to have more than a 50% chance of breaking through the soft armor panel.

Just add ceramic plates to this U.S. Military issue vest to stop rifle rounds.

Woodland Camo IBA Kevlar Flak Jacket Features

  • Interceptor Body Armor Outer Tactical Vest & Soft Armor – XL
  • Condition: New
  • Size: XL – Fits a Chest Size range from 45″ – 49″
  • Pattern: M81 Woodland Camo
  • reinforced drag handle
  • MOLLE/PALS webbing for pouches
  • Includes
    • Use & Care Manual
    • Base Fragmentation Vest 8470-01-497-8609
    • Yoke and Collar 8470-01-465-4654
    • Throat Protector 8470-01-465-1857
    • Groin Protector 8470-01-497-8631
    • Includes all Kevlar (SOFT ARMOR) pieces
  • Fast Shipping!
  • Made in the USA!

Additional information

Weight 11.25 lbs
Dimensions 25 × 22 × 5 in